M2TECH YOUNG User Manual download pdf (Page 22)

YOUNG DSD

DIGITAL-TO-ANALOG CONVERTER AND PREAMPLIFIER

REVISION 1.1 – march 2014

M2Tech

www.m2tech.biz

7.1. Volume Setting

Volume setting is done by either rotating the encoder knob (Figure 1.4), or pushing

the VOL+ e VOL- keys on the remote control.

Volume can be set from -96dB (minimum) to 0dB (maximum) in 0.5dB steps.

Depending on the chosen volume display mode, the display will show attenuation in

dB or in steps on a scale such that step “0” is equivalent of the minimum level

possible.

7.2. Mute Toggle

The YOUNG DSD is provided with a feature (muting) which allows for immediately

lowering of the listening level by 20dB without touching the encoder knob. This

feature is useful when it is necessary to listen to another person for a while, or to

operate the source to change track, answer the telephone, etc.

Muting is toggled by a short press of the front panel’s left button (Figure 1, 1). When

muting is active, the “M” letter appears on the display (Figure 6).

To reset muting the user only needs to push the front panel button once more: the

original listening level will be immediately restored and the “M” letter disappears.

As an alternative it is possible to toggle mute on and off by pushing the “MUTE” key

on the remote control.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 87 88

No comments

M2TECH YOUNG User Manual Page 22